(Free Shipping) Clubiona 2021 New Design and High Performance Self-leveling DIY economic Horizontal and Vertical Cross Line Laser Level

Technical data

Standard: 2 lines (1 vertical line, 1 horizontal line)
Accuracy: +-1.5mm / 5m
Laser module Safty level: class 2 (IEC/EN60825-1/2014)
waterproof / dustproof: IP54
Self-leveling time <= 3 s
Damping: magnetic
Laser Wavelength: 635nm or 520nm
Working distance diameter: 40m (with receiver / detector)
Outdoor working: If the laser level is needed to be worked outdoor frequently, it is better to buy a green beam laser.
Tilt Slash function: Yes
Self-leveling: Yes
Auto adjustment range: ±4 degrees
working tempature: -10 degrees celsius to 50 degrees celsius
Power: DC3.0 (AA1.5 X2) (NOT INCLUDED IN THE PACKAGE)
Gross weight: 0.6 kg
Measurement: 14*13*9cm

German Laser Module Green Laser Technology

More brighter to ordinary green beam and red beam

Strong Magnets:

Strong magnets with tripod thread can attaches the laser to any steels easily, turning around 360 degrees as you like.

Two modes of use

Self-leveling mode: Unlock the pendulum, self-leveling mode is enabled. The laser beam will blink continuously at 2Hz when the tool is beyond self-leveling range (4°±1°).
Tilt slash line: When the pendulum is locked, it can make tilt slash lines, but the laser lines would twickle in every 5 seconds.

Simple structure and Operation:

1. Unlock the pendulum before short push the power switch to turn the laser tool ON, it can transmite two lines.
NOTE: The laser lines would twickle if the laser level is not put in level.
2. Short push the power switch to the middle place to turn on slash mode.
3. Lock the pendulum before short push the power switch to turn the laser tool OFF.

Remark: Only the red laser line(MD02R) can work separately.

IP54 Dustproof & Waterproof

IP54 water/dust-proof ensures you work well under hazardous working conditions. Protected by TPR soft rubber on all sides makes the laser level shock resistant, wear resistant and impact resistant perfectly.