MP808S-TS

About this item

【NOTE】: 1. The source language is English. If you need a German/other language, send the S/N (12 digits on the back of the device) to us. 2. If you are not sure whether MP808S-TS fits your car, please send us the VIN (17 digits) to check the functions. Some 2018 and later FCA models require a Chrysler 12+8 connector for proper diagnosis. Please contact us for specific supported models.

【2023 UPDATED VERSION OF MK808TS/MP808BT/MP808BT】MP808S-TS Scan Tool is equipped with professional TPMS functions, ECU coding, hidden functions, flashing function, 31+ reset services and several special functions for different systems. Meanwhile, this scanner has completely upgraded its hardware with ROCKCHIP RK3566 CPU, 4GB RAM, Android 11 OS and 5GHz Dual Wi-Fi, which makes it run 4x faster.

【ADVANCED ENCODING EQUIVALENT TO MS908SP/MS ELITE】ECU encoding, gives the scanner the ability to adaptively encode data and backup lost data after component replacement. It is for multiple brands like Benz, Land Rover, Audi, VW, Porsche, etc.; Coding is also used for flashing hidden functions to achieve personalization, such as adjusting mirrors, sound, and activating some high-end functions, etc.

【MORE PRO TPMS FUNCTIONS, LIKE MS906TS/MS906PRO-TS】The diagnostic scanner has an integrated TPMS module for full TPMS functions. The professional and high-end TPMS functions are matched with professional TPMS tools by allowing the MP808S-TS to trigger OEM TPMS sensors, perform deep diagnostics for TPMS, program Autel MX sensors, and perform TPMS sensor relearn procedures after replacement can perform.

【31+ SERVICES, SAME AS MS906BT/MK906BT/MS906】Autel Automotive Scan Tool MP808S-TS performs over 31 comprehensive service functions, the wide range of functions is enough for busy garages to complete daily maintenance tasks. In addition to the service functions, we also offer various special functions for certain models, which allow you to carry out a number of resets and matches on vehicles.

【ACTIVE TEST & ALL SYSTEM DIAGNOSTICS, LIKE MP808/MP808K】You can receive DTCs from the vehicle to diagnose the cars and send commands to them to test the actuator's functions, such as the fuel pump, air conditioning clutch, electronic parking brake, etc. The MP808S-TS scanner accesses all systems of 99% of the vehicles and provides multiple diagnostic functions such as reading codes, clearing codes, live data display, etc.

【MULTI LANGUAGES & QUALITY TECHNICAL SUPPORT】Unlike MS906PRO-TS which only supports English, MP808S-TS supports 14 languages, so you can switch the language to your preferred language. In terms of diagnostic functionality, the scanner is the Bluetooth version of the MS906 and is suitable for more than 150 car brands worldwide. 2 years Free update (for orders since 2023/5/31), 12 months warranty and lifetime technical support.

Reasons why you need MP808S-TS Scan Tool

Whether you are a professional mechanic, a car enthusiast who enjoys working on your cars, a functional auto scan tool is one of the best investments you can make.

MP808S-TS Scanner is equipped with upgraded hardware to achieve 4X faster processing speed, such as CPU: ROCKCHIP RK3566; OS: Android 11; RAM: 4G; Wi-Fi: 2.4 & 5GHz, etc.

Full Diagnostics: Cover 80+Brands, 150+Brands. Support read code, read freeze frame data, display live data, clear codes, and read ECU information for all systems. Bi-directional control and Auto VIN make diagnosis smarter and easier.

Professional TPMS Functions: This includes activating OEM TPMS sensors to read sensor information, programming Autel MX sensor to replace defective sensors, relearning TPMS after replacement, etc., and performing diagnostics and special functions for TPMS.

Hot Services and ECU Coding: Covers 31+ services and specific system features for supported vehicles, helps reset and turn off reminder lights. ECU coding can be used to code adaptive data and flash some hidden functions.

User-friendly applications: Data Manager and Shop Manager maintain a database for your workshop, Remote Desk gives you easy access to professional support, and MaxiFix allows you to connect with other users. The MP808S-TS scanner is also a tablet that allows you to search the web.

Advanced features improve diagnostic efficiency

ECU Coding: MP808S-TS supports ECU coding to encode adaptive data when you don't have internet connection in your workshop to do it online. Modifying the parameters and flashing new files into the ECU memory can change the behavior of the ECU. This feature is not available for all vehicles.

Guided Functions: This function saves you from problems like looking up channel numbers and login codes. And it also guides you to purchase original maintenance services. This function saves technicians a lot of effort during repairs and maintenance.

Realize Hidden Convenience Functions: This is a PLUS function for the MP808 Level Scan tool, which allows mechanics to change the values ​​of the vehicle's ECU to re-flash hidden functions or turn on/off personal setting functions, such as folding mirrors, automatic door lock, car lock sound, sports dashboard, ambient lighting, one-click lift-up window, seat belt warning and signal flashing times, etc.

Ideal TPMS tool for tire pressure monitoring, meets 99% of aftermarket requirements

For individual vehicle owners and tire technicians, digital tire monitoring solutions offer a wealth of benefits such as: B. improving tire uniformity, minimizing irregular tire wear, saving fuel, reducing breakdowns and improving safety. The MP808S-TS diagnostic scanner is just the right aftermarket tool to provide you with these solutions.

Activate 99% of TPMS sensors: Trigger the sensors to view sensor data such as sensor ID, tire pressure, tire temperature, sensor battery, sensor location and sensor frequency. It also sends the sensor data to the vehicle's ECU to allow the ECU to learn the locations of the sensors after a wheel spin or sensor swap.

Advanced TPMS Diagnostics: Access tire pressure monitoring system and check health status thoroughly. It will display DTCs when it detects the errors and you can view the sensor information data stream; after fixing the problem, use the scanner to clear the DTCs.

Program the Autel MX Sensor (up to 16 sensors simultaneously): Program the sensor data onto the MX sensor to replace existing sensors with low battery life or those that have stopped working. Autel MX sensors are universal sensors that are 100% cloneable and cover 99% of tire sensors.

Relearn TPMS Sensors: Transfer new sensor IDs to vehicle ECU for sensor recognition. Step-by-step instructions for learning are provided for all supported vehicles.

More than 31 services meet various maintenance needs

The service list will be further expanded with the software updates. These services provide quick access to vehicle systems for various scheduled service and maintenance tasks with clear instructions. The following services are provided for your information:

Oil Reset Service: Reset the mileage or driving time so the service light goes out and the system activates the new service cycle. After changing the engine oil or electrical devices that monitor oil life, reset the service light.

Steering Angle Calibration: After replacing the steering angle sensor, steering gear, steering column, tie rod, steering knuckle, etc., performing four-wheel alignment or body restoration, the steering angle needs to be reset.

EPB Reset: After replacing the brake pad or servo motor, the brake pad must be reset to avoid vehicle alarms.

ABS Bleed: Run various bi-directional tests to check the ABS. And reset it after replacing the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake pipe or brake fluid.

Reset/Learn Electronic Throttle Position: Initialize the throttle actuators after replacing the ECU, throttle body assembly, intake manifold, or cleaning the throttle body.

Battery Register/Battery Maintenance: Allows the vehicle battery monitor to be reset after the main battery has been replaced.

Diesel Particulate Filter (DPF) Regeneration: Clean the DPF filter of particulates to stabilize the filter performance after replacing the exhaust back pressure sensor, particulate trap, fuel additive nozzle, catalytic oxidizer or regeneration control module.

Injector Coding: Program the numbers of replaced fuel injectors after replacement

Camshaft Spline Learning: Helps user to finish spline learning after changing crankshaft in car engine.

All-system diagnostics to keep cars running safely and efficiently

A modern car consists of thousands of individual parts. Similar to the human body, each part has a different function. It's hard to look under the hood and see the status of parts, let alone the different vehicles. The MP808S-TS scanner will help you access all systems and perform thorough and in-depth diagnostics:

Auto VIN: With just one touch, the scanner allows technicians to quickly identify vehicles, get the VIN, scan all diagnosable ECUs, and run diagnostics on selected systems.

Fault Display: Retrieve and display the DTCs from the vehicle's ECU. Freeze frame data can also be displayed.

Live Data: View the data stream list for the selected module.Clear DTCs: After performing certain repairs, you can clear the codes from the vehicle.

Read ECU Information: Retrieve and view the specific information for tested ECUs like ECU, Vendor, Hardware, Software, etc.

And the MP808S-TS scanner is compatible with 99% of all brands and makes, and the diagnostics are applicable to all systems.

• ...

Voltage: 5V/1.5A

Special Features: Wifi,Bluetooth

Software version: Latest version

Software update: 2 years free

Processor: Rockchip RK3566,Rockchip RK3566

Origin: Mainland China

OS: Android 11.0

OBD Interface: CAN, EOBD, OBD, OBDII

Model Name: MaxiPRO MP808S-TS

Memory: 4G/64GB

Material Type: Plastic

Item Width: 30cm

Item Weight: 4kg

Item Type: Engine Analyzer

Item Length: 50cm

Item Height: 15cm

Hardware Version: 2023 Newest Version

Function 7: Bi-Directional Control

Function 6: FCA AutoAuth

Function 5: online ECU coding

Function 4: 36+ special services

Function 3: Full TPMS Services

Function 2: Full Systems Diagnoses

Function 1: Updated from MP808/DS808K/MP808K/MP808TS

External Testing Certification: ce

Electronics: Yes

Display: 7-inch LCD with 1024x600 resolution

Compatible with: Work on both 315Mhz & 433Mhz Sensor

Brand name: Autel